Table 6-4.Mcu Meeting Password Protection - Polycom ViewStation FX4000 User Manual

Table 6-4. MCU Meeting Password Protection
Auto Answer Multipoint and MCU
Meeting Password Settings
Auto Answer Multipoint mode is set to Do
Not Disturb.
-and-
A Meeting Password is set on the MCU.
Auto Answer Multipoint mode is set to No.
-and-
A Meeting Password is set on the MCU.
© Polycom, Inc. 2002
Chapter 6 - Using Advanced System Features
Resulting MCU Handling of Meeting
Password
The ViewStation FX or VS 4000 MCU will not
acknowledge any incoming, dial-in calls. The
MCU behaves as if it does not have a Meeting
Password .
The ViewStation FX or VS4000 MCU
behaves as if it does not have a Meeting
Password .
The MCU ViewStation FX or VS 4000 should
answer any incoming, dial-in calls manually.
This means that the user will be prompted
with the message "You have a video call.
Would you like to answer?" and can answer
Yes or No. This message can be followed by
a far-site video number and a far-site name if
they are available.
231