Entering V.35/Rs-449 Video Numbers; Figure 3-12.Video Numbers Screen - Polycom ViewStation FX4000 User Manual

ViewStation FX/VS4000 User Guide

Entering V.35/RS-449 Video Numbers

86
Prefixes and suffixes are a function of your DCE. Please consult the
DCE user guide for additional information on setting dialing
profiles.
If you enabled RS-366 Dialing, the Video Numbers screen appears.
Figure 3-12. Video Numbers Screen
To enter video numbers:
1. Enter the numbers that other sites can dial to call your
ViewStation FX or VS4000.
2. When you have finished, review your entry, then highlight the
Save icon and press the SELECT button on the remote control.
For additional information about V.35/RS-449 configuration,
see Advanced V.35/RS-449 Network Interface
The initial configuration process specific to the V.35/RS-449
network interface is complete. To continue with the initial
configuration process, skip to
Screens on page 95.
If you disabled RS-366 Dialing, you are operating in direct connect
mode and the Video Numbers screen will not be displayed.
Final Out-of-Box System Setup
Note
Configuration.
www.polycom.com