Polycom ViewStation FX4000 User Manual page 218

ViewStation FX/VS4000 User Guide
220
To place the first call:
a. On the main screen, highlight the Video Call icon and press
the SELECT button on the remote control.
b. Use the numeric keypad on the remote control to enter the
number you want to dial in the highlighted field.
When you enter a number using the remote control, you can
hear a voice confirmation of that number from the ViewStation
FX or the VS4000. This feature only applies to US and UK
English at this time. This feature can be enabled on the General
Setup screen by selecting the Keypad Audio Confirmation
option.
If you need to enter alpha characters, press the AUTO
button on the remote control to bring up the on-screen
keyboard.
Enter a dot. To enter a dot, press the right button on the remote
control.
Shift key settings. The on-screen keyboard's Shift key has three
settings:
- lower case: using the remote control, select the Shift key until
it turns into a greyish down arrow.
- upper case: using the remote control, select the Shift key until
it turns into a green up arrow (as shown on Figure 5-9). Only the
next letter you enter is capitalized.
- caps lock: select the Shift key twice. A lock symbol appears on
the key. All the letters are capitalized while the lock is visible.
c. Use the arrow buttons on the remote control to highlight the
Speed icon on the screen and select the speed of your call
from the list that appears.
d. Use the arrow buttons on the remote control to highlight the
call type field (ISDN, IP, or AUTO). Press the SELECT
Note
Tip
www.polycom.com