Chapter 3 - Initial System Setup - Polycom ViewStation FX4000 User Manual

© Polycom, Inc. 2002
Initial System Setup
This chapter describes the initial system configuration screens that
you see when you power on your ViewStation FX or VS4000 for the
first time.
Topics in This Chapter
The following topics are included in this chapter.
Topic Description
First System This section describes the first system
Screens screens that are displayed during the initial
out-of-box configuration.
Initial Setup This section describes the initial
for IP (H.323) IP-specific screens needed to configure
Calls basic network settings.
Initial Setup This sections describes the initial screens
for ISDN used to configure your ISDN connection
(H.320) Calls (V.35/RS-449, PRI, or BRI).
Final The screens that complete the initial
Out-of-Box configuration sequence are covered in this
System Setup section.
Screens
Setting up the This section indicates where to find the
Firewall appropriate firewall configuration
information, if you need to set up a firewall.
Verifying Initial This section provides information about
Setup placing a test call and checking network
connectivity.
3
Page
73
78
81
95
98
99
71