Lan/Intranet - Polycom ViewStation FX4000 User Manual

ViewStation FX/VS4000 User Guide

LAN/Intranet

Symptom
Cannot access the
ViewStation FX or
VS4000 from the PC
browser.
System does not allow
management via the
Web.
294
Cause
DHCP Client is ON and no DHCP
server is available.
The LAN cable is connected to the
PC port.
Bad LAN cable.
There is a firewall between your
PC and your ViewStation FX or
VS4000.
Your PC is on a different subnet
and there is a router between you
and your ViewStation FX or
VS4000.
Wrong password.
Too many managers are logged
into the system.
Solution
Contact your network administrator.
Connect the LAN cable to the LAN
port on the rear of the ViewStation
FX or VS4000.
Check the light on the back of the
ViewStation FX or VS4000. You
should have a steady green light to
indicate a connection to the LAN and
a flashing orange light to indicate
LAN traffic.
Consult your network administrator.
Change your PC or ViewStation FX
or VS4000 subnet mask and IP
address so that they are both on the
same LAN or subnet.
Enter the correct password. Note:
The default password is "admin."
Only two system managers are
allowed at any one time. To log
everyone out, restart your
ViewStation FX or VS4000.
www.polycom.com