Mcu Meeting Password Protection In Multipoint Dial-In Videoconferences - Polycom ViewStation FX4000 User Manual

ViewStation FX/VS4000 User Guide
MCU Meeting Password Protection in Multipoint Dial-In
Videoconferences
230
all the sites dialing into that MCU need to provide a password
in order to join the videoconference. Refer to
Password Protection in Multipoint Dial-In Videoconferences on
page 230.
To be able to dial into an MCU or a bridge that has a password
set (see above item). The site calling into the MCU needs to send
the established Meeting Password to the MCU.
To view slides on the Web interface. Refer to
Presentation on page
To view a meeting/stream on the Web interface. Refer to
Viewing a Meeting on page
To access Closed Caption on the Web interface. Refer to
Caption on page
The following table describes how the ViewStation FX or VS4000
MCU handles the Meeting Password as the multipoint conference
password when dial-in sites are calling into the ongoing conference,
based on the Auto Answer Multipoint and the Meeting Password
settings.
To access Auto Answer Multipoint:
Select System Info > User Setup or System Info > Admin Setup >
General Setup.
For information about Auto Answer Multipoint, see
Auto Answer Multipoint Mode on page
For information about dial-in calls in multipoint videoconferences,
refer to Dial-In Calling on page
267.
268.
270.
Note
239.
237.
MCU Meeting
Viewing a Slide
Closed
Setting the
www.polycom.com