System Setup And Remote Management - Polycom ViewStation FX4000 User Manual

ViewStation FX/VS4000 User Guide

System Setup and Remote Management

278
The ViewStation FX or VS4000 Web interface lets you perform most
of the setup, configuration, and diagnostics tasks that are available
on the ViewStation FX or VS4000 user interface. These tools are
grouped under two icons:
Admin Setup—Most of the setup, configuration, and message
screens can be accessed from this icon. See
Setup/General Setup on page
Diagnostics—Most of the diagnostic screens and tools can be
accessed from this icon. See
To access ViewStation FX or VS4000 screens grouped under
the Admin Setup and Diagnostics icons:
1. Launch your Web browser and enter the IP address of the
ViewStation FX or VS4000 you want to manage in the Web
browser's Address field. The ViewStation FX or VS4000 Web
interface main page appears.
Internet Explorer 4.0 or higher is recommended over Netscape
Navigator because the ViewStation FX or VS4000 uses
Microsoft's ActiveX controls to enable the PowerPoint
presentation capability.
2. Click the Set Up System icon. The System Information Web
screen appears. This screen displays information about your
ViewStation FX or VS4000, as well as the main management and
features icons.
You will be prompted to enter an Admin Password if one has
been set in the Security screen (System Info > Admin Setup >
Security). The user name is "admin."
Admin
279.
System Diagnostics on page
Note
Note
280.
www.polycom.com