Placing a Call from the Web Interface
Placing a Call Using the Application Programming Interface
Answering a Video Call Manually
© Polycom, Inc. 2002
To unlock a Speed Dial entry:
To unlock a number, highlight the entry.
1.
Press the * button on the remote control.
2.
For instructions about how to place a video call from the Web
interface, refer to
Basic Features of the Web
For instructions about how to place a call using the API, refer to the
ViewStation FX and VS4000 ARENA API Programmer's Guide.
The ViewStation FX and the VS4000 are set by default to
automatically answer incoming calls.
To set your ViewStation FX or VS4000 to answer video calls
manually:
1.
From the main screen, select System Info > Admin Setup >
General Setup or select System Info > User Setup.
2.
Highlight the field next to Auto Answer Point to Point, and
select the No option from the drop-down menu.
3.
When there is an incoming call, the user will be prompted with
a message "You have a video call. Would you like to answer?".
This message is followed by a video number and a far-site name
if they are available. If the user selects Yes, the call will be
connected. If the user selects No, the call will be rejected.
Chapter 5 - Using the ViewStation FX/VS4000
Interface.
187