Setting Global Management Preferences; Figure 4-31.Global Management (Setup) Screen - Polycom ViewStation FX4000 User Manual

Setting Global Management Preferences

© Polycom, Inc. 2002
Chapter 4 - Advanced Configuration for your Network Environment
Global Management must be manually set on the ViewStation FX
and VS4000 systems to be active.
To access the Global Management setup screen:
Select System Info > Admin Setup > LAN/H.323 > Global
Management > Setup. The Global Management setup screen
appears.
Figure 4-31. Global Management (Setup) Screen
You can set the following options on this screen:
Allow Remote Monitoring—Enable this option to allow the
GMS system administrator to view a call or view the room
where the ViewStation FX or VS4000 camera is installed.
For privacy reasons, you can enable this option only from the
near-site ViewStation FX or VS4000. Also, if you want to protect
your office privacy, disable this option.
Time Difference from GMT—Enter the time difference from
where the ViewStation FX or VS4000 is installed and Greenwich
Mean Time (GMT). This allows the GMS to view the local time
of the managed ViewStation FX or VS4000.
Daylight Savings Time—Enable this option if the area where
the ViewStation FX or VS4000 is installed participates in
Daylight Savings Time.
165