Adding A Video Call To A Telephone Call - Polycom ViewStation FX4000 User Manual
Hide thumbs
Also See for ViewStation FX4000:
- Getting started manual (50 pages) ,
- User manual (20 pages)
Table of Contents
Advertisement
ViewStation FX/VS4000 User Guide
Adding a Video Call to a Telephone Call
192
To add a video call once your telephone call is connected:
1.
Press the MENU button on the remote control until you reach
the main calling screen.
2.
Highlight the Video Call icon and press the SELECT button on
the remote control. The Video Phone screen appears.
3.
Use the numeric keypad on the remote control to enter the
number you want to dial.
If you are dialing within your PBX system, you only have to dial
the last four digits of the number.
To delete a digit, press the left arrow button on the remote
control.
To delete an entire phone number, highlight the Clear icon on
the screen and press the SELECT button on the remote control.
4.
Press the CALL•HANG-UP button on the remote control to
place the call.
5.
To end the call, press the CALL•HANG-UP button on the
remote control.
www.polycom.com
Advertisement
Table of Contents
