Information About Placing An Ip Video Calls With Netmeeting - Polycom ViewStation FX4000 User Manual

ViewStation FX/VS4000 User Guide

Information About Placing an IP Video Calls with NetMeeting

276
Admin Setup > Security) of the ViewStation FX or the
VS4000.
c. Click OK.
4. You are now in the How to Start a NetMeeting Call Web screen.
You can either follow the on-screen instructions or proceed with
the present instructions.
5. Enter the IP address of your PC.
In Windows 95, 98, and ME, you can find your PC's IP address
by clicking the Start button on your PC desktop. Then, click
Run, and type winipcfg in the Open box.
In Windows NT and 2000, you can get your IP address by typing
ipconfig at the command prompt.
You can also obtain the IP address of your PC from the
NetMeeting application. Click Help and About NetMeeting.
6. To open NetMeeting on your PC, double-click the NetMeeting
Application icon. Make sure the far site has also launched
NetMeeting.
7. Select Call > New Call from the NetMeeting menu on the PC
connected to the ViewStation FX or VS4000 that initiated the
videoconference. Or you can also click the phone icon on the
right of the menu. The Place a Call window opens.
In the To field, enter the IP address of the ViewStation FX or
8.
VS4000 that is connected to your PC. For easy reference, the IP
address of the ViewStation FX or VS4000 is provided on the
How to Start a NetMeeting Call Web page.
You can make IP (H.323) video calls to and from a PC using
NetMeeting 2.11 or 3.0.
Line Speed. The line speed of a video call from NetMeeting to a
ViewStation FX or VS4000 depends on the bandwidth setting in
NetMeeting:
Note
www.polycom.com