Polycom ViewStation FX4000 User Manual page 299

© Polycom, Inc. 2002
A LAN host name must be entered. It cannot be deleted or left
blank. When the LAN host name is changed, the system
prompts the user for a reboot.
LAN IP Address—The IP address is assigned automatically
through a DHCP server or is set manually (static). To manually
set the IP address, go to System Info > Admin Setup >
LAN/H.323 > LAN/Intranet.
Software Version—The software version and the date of the
software release are displayed in this field. Additional
information about the ViewStation FX or VS4000 software
version is located in System Info > Admin Setup >
Software/Hardware > Software.
Serial Number—The serial number is unique to each
ViewStation FX or VS4000 system. This number is also located
on a bar code sticker on the bottom of the unit. This number
cannot be modified.
Model—The ViewStation FX or VS4000 model type is
displayed.
The Diagnostics, User Setup, and Admin Setup icons are displayed
at the bottom of the screen. These icons link to screens where you
can perform various setup and diagnostic tasks.
Appendix A - Screen Reference
Note
301