Configuration For Isdn (H.320) Calls; Advanced V.35/Rs-449 Network Interface Configuration - Polycom ViewStation FX4000 User Manual

Configuration for ISDN (H.320) Calls

Advanced V.35/RS-449 Network Interface Configuration

© Polycom, Inc. 2002
Chapter 4 - Advanced Configuration for your Network Environment
This section contains advanced ISDN configuration information for
the V.35/RS-449, PRI, and BRI network interfaces. The information
displayed on the various ISDN configuration screens varies
according to the network interface that is attached to your
ViewStation FX or VS4000 system.
The configuration information is divided into:
Advanced V.35/RS-449 Network Interface Configuration
Advanced PRI Network Interface Configuration
Advanced Quad BRI Network Interface Configuration
Once your ISDN configuration is complete, you may want to place
a test call. For information about placing a call, refer to
in chapter 5.
This section describes information and settings for the following
advanced V.35/RS-449 configuration screensR:
Advanced V.35 (Setup). See
Interface Control Signals, on page
Broadcast Mode. See
Mode, on page
Dialing Speeds. See
Advanced Dialing (Calling Profile, Prefix, Suffix). See
the Calling Profile, on page
Crypto Resync Pulse. See
The V.35/RS-449 network interface supports the V.35 or RS-449
protocol depending on the cable you use to connect your
equipment to the network interface.
Configuring the V.35/RS-449 Serial
126.
Setting up Satellite (H.331) Broadcast
127.
Selecting Dialing Speeds, on page
130.
Enabling Crypto Resync on page
Notes
Video Calls
128.
Setting
132.
125