Enabling Data Conferencing On The Viewstation Fx Or Vs4000; Using A Showstation Ip; Using Microsoft Netmeeting - Polycom ViewStation FX4000 User Manual

Enabling Data Conferencing on the ViewStation FX or VS4000

Using a ShowStation IP

Using Microsoft NetMeeting

© Polycom, Inc. 2002
StreamStation, WebStation or ShowStation itself, or, the IP address
of the PC on which Netmeeting is running.
If you want to use the ViewStation FX or VS4000 data conferencing
capabilities, you must enable them on the ViewStation FX or
VS4000.
To enable data conferencing:
1. Select System Info > Admin Setup > Data Conference. The
Data Conference screen appears.
2. Enable either the NetMeeting or ShowStation IP option. The
ShowStation IP option appears only if a ShowStation is
connected to the ViewStation FX, the VS4000, or the LAN.
Data conferencing is only available during H.320 calls and must be
supported by far-site systems
For more information on ShowStation IP, see
chapter 2.
For more information about data conferencing using NetMeeting,
refer to NetMeeting
Chapter 6 - Using Advanced System Features
Note
in chapter 7.
ShowStation IP in
245