Setting Advanced Pri Options (E1 And T1); Figure 4-18.Advanced Pri Setup Screen - Polycom ViewStation FX4000 User Manual

ViewStation FX/VS4000 User Guide

Setting Advanced PRI Options (E1 and T1)

140
You can define several advanced PRI options for both T1 and E1 PRI
network interface modules from the Advanced PRI Setup screen.
To access the Advanced PRI Setup screen:
Select System Info > Admin Setup > Video Network > IMUX >
PRI Network > PRI Setup > Advanced PRI Setup.
Figure 4-18. Advanced PRI Setup Screen
The following information describes the options on the Advanced
PRI Setup screen.
Do not change the default values without careful consideration.
Determining the call-by-call value requires consultation with the
telephone service provider.
Restore Default—Selecting this option restores the default
values to all of the fields on the Advanced PRI Setup screen.
Numbering Plan—The two options, ISDN and Unknown, are
described below:
Unknown: The default selection is Unknown. With this
•
option, the numbering plan and number type are sent to the
upstream as unknown, and the dialed phone number is sent
Caution
www.polycom.com