Selecting Dialing Speeds; Setting Broadcast Mode Options; Figure 3-9.Dialing Speeds Screen - Polycom ViewStation FX4000 User Manual

Selecting Dialing Speeds

Setting Broadcast Mode Options

© Polycom, Inc. 2002
When you have finished, highlight the Save icon and press the
SELECT button on the remote control.
If you enabled RS-366 Dialing, select the Dialing Speeds icon in the
Video Network screen.
1. Select the dialing speeds on this screen. The default speeds are
2 x 64 Kbps, 256 Kbps, 384 Kbps, 512 Kbps, and 768 Kbps.
2. To add or remove speeds, scroll through the data rates and press
the SELECT button on the remote control to select your
preferred dialing speeds; a red check appears when a dialing
speed is selected.
Figure 3-9. Dialing Speeds Screen
The selected dialing speeds apply only to RS-366 calls. Nx56 and
Nx64 are for H.320 calls, while IPx56 and IPx64 are for H.323 calls.
For non-dialed calls, the call speed is determined by the DCE.
If you enabled the Broadcast Mode option on the Video Network
screen, the Broadcast Mode Setup icon appears. Selecting this icon
takes you to the Broadcast Mode screen. For more information on
Chapter 3 - Initial System Setup
Note
83