Ending a Video Call
© Polycom, Inc. 2002
To end a video call:
1.
To end your call, press the CALL•HANG-UP button on the
remote control. The Call Hangup Choices screen appears.
2.
Highlight the Disconnect Video Call icon and press the
SELECT button or press the CALL•HANG-UP button on the
remote control twice. If the call was made with a number that is
not in your Address Book, a dialog box gives you the
opportunity to add the number.
If you select Yes the system takes you to the Address Book
•
where you can enter the information.
•
If you select No, the main calling screen appears on your
monitor.
•
To stay in the call, select the Stay in Call icon and press the
SELECT button.
If you stay in this screen for 60 seconds without pressing the
SELECT button, the call automatically disconnects.
Chapter 5 - Using the ViewStation FX/VS4000
Note
189