Crypto Resync Pulse; Software And Hardware Screens - Polycom ViewStation FX4000 User Manual

ViewStation FX/VS4000 User Guide

Crypto Resync Pulse

Software and Hardware Screens

Software
338
Software Update Password—This password is used for ISDN
software upgrades of your system. The ViewStation FX or
VS4000 can be upgraded from a remote endpoint while in an
ISDN call. This password also protects your system from any
unwanted updates.
Crypto Resync—This option is only available if a V.35/RS-449
network interface is attached to your system.
This screen is specific to a ViewStation FX or VS4000 with a
V.35/RS-449 network interface.
To access the Crypto Resync Pulse screen:
1. Select System Info>Admin Setup>Security.
2. In the Security screen, select the Crypto Resync option.
For more configuration information, refer to
Resync on page 132.
To access the Software, RS-232, Hardware Information, Send
Address Book, and Far Site Software Update screens:
Select System Info > Admin Setup > Software/Hardware.
The Software screen displays the ViewStation FX or VS4000
system's serial number, BOOTUI number, software version,
Note
Enabling Crypto
www.polycom.com