Setting Video Network Options - Polycom ViewStation FX4000 User Manual

ViewStation FX/VS4000 User Guide

Setting Video Network Options

82
Use the Video Network screen to set the parameters for your
V.35/RS-449 video network.
Figure 3-8. Video Network Screen
You can set the following options on this screen:
RS-366 Dialing—Enable this option if you want to call from the
ViewStation FX or VS4000 through the DCE connection to the
far-end videoconferencing system. Disable this option if you are
using your DCE to dial the call or if you have a dedicated
connection to the far site.
If the RS-366 Dialing option is enabled, you need to select
Dialing Speeds on this screen (see following
Speeds section).
V.35 Ports Used—Select 1 if you are placing only 1-channel calls.
Select 1+2 if you are placing 2 x 56 Kbps or 2 x 64 Kbps channel
calls.
Dialing Protocol—RS-366 appears as the dialing protocol if the
RS-366 Dialing option is enabled. If the RS-366 Dialing option
is disabled, the Dialing Protocol does not appear.
Broadcast Mode—Enable or disable H.331 Broadcast Mode if
the ViewStation FX or VS4000 is connected to the network via
satellite.
Note
Selecting Dialing
www.polycom.com