ViewStation FX/VS4000 User Guide
Adjusting a Second Camera
202
To enable the Far Control of Near Camera option on your
ViewStation FX or your VS4000:
Select System Info > Admin Setup > Video/Camera > Cameras.
To put the camera in control mode:
To control or adjust the ViewStation FX or VS4000 camera on the far
site, press the FAR button on the remote control. The far site
camera's view appears full screen on the television monitor. A
Camera icon appears in the upper right corner pointing away from
you. Use the remote control to adjust the far-site camera the same
way you would adjust your camera.
To tilt or pan the camera:
Use the arrow buttons on the remote control to tilt the camera up
and down and to pan from side to side.
To zoom:
Use the ZOOM buttons on the remote control to zoom in and out.
To go to a menu screen while in a call:
While in a call, if you have to go to a menu screen to make some
adjustments, pressing the NEAR or FAR button on the remote
control returns you to your call view.
If you have a second pan/tilt/zoom camera connected to your
ViewStation FX or your VS4000, you can adjust it with the remote
control also.
To adjust a second camera:
Press the NEAR button twice. Icons appear for all of the
1.
connected local cameras.
www.polycom.com