Polycom ViewStation FX4000 User Manual page 310

ViewStation FX/VS4000 User Guide
312
Meeting Password—The meeting password is used:
As the password for the ViewStation FX or VS4000 when it
•
it is used as an MCU.
• For dialing into an MCU with a password already set.
• As the password for viewing slides on the Web interface.
• As the password for viewing streams on the Web interface.
• For accessing Closed Caption.
Far Site Name Display Time—This option displays the name of
the far site for a defined number of seconds.
• 15 seconds—The far site name is displayed by default for 15
seconds.
• Blank—The far site name is displayed until the call is
ended.
Multipoint Mode—To change Multipoint Mode, highlight the
Multipoint Mode field and press the SELECT button on your
remote control. The Multipoint Setup screen appears. In the
Multipoint Setup screen, you can set the Multipoint Mode to
Auto, Discussion, Presentation, or Full Screen. By default, it is
set to Auto. For more information about multipoint modes, refer
to Multipoint Viewing Modes
You can also set the Auto Answer Multipoint mode in the
Multipoint Setup screen. For more information, refer to Auto
Answer Multipoint at the beginning of this section on page 310.
in chapter 6.
www.polycom.com