Figure 3-11.Advanced Dialing Screen (Calling Profile List) - Polycom ViewStation FX4000 User Manual

© Polycom, Inc. 2002
To select and modify the calling profiles:
Select the Calling Profile field. The following calling profile list
1.
appears.
Figure 3-11. Advanced Dialing Screen (Calling Profile List)
2. Select the appropriate equipment/manufacturer from the
drop-down list and press the SELECT button on the remote
control.
3. When you have finished, review your entry. The Prefix or Suffix
information (depending on the equipment name that you
selected) is now visible on the Advanced Dialing screen.
4. Highlight the Save icon and press the SELECT button on the
remote control.
You have to enter the information only once on the Advanced
Dialing screen. When you place a call, there is no need to enter
the prefix again—simply select the preferred dialing speed and
the ViewStation FX or VS4000 enters the proper prefix.
Dialing Prefix and Suffix Information. Dialing prefixes are
numbers and characters that are sent to your DCE equipment before
sending the number dialed.
Dialing suffixes define the dialing speed of the DCE equipment.
This provides the users with the ability to select the dialing speed
when placing a call.
Chapter 3 - Initial System Setup
Note
85