System Screens Quick Reference; Diagnostic Screens - Polycom V500 System Administrator's Manual

Administrator's Guide for the V500 System

System Screens Quick Reference

Diagnostic Screens

7 - 2
These screens allow you to view information about the system, configure the
system, and diagnose performance issues if they arise. They are available on
the system and through the V500 web interface.
To view information about the system, go to the home screen and select
System. Then choose the type of information you need:
This choice:
Admin Settings
Diagnostics
System Information
Utilities
User Settings
You can view network statistics and perform diagnostic tests from the
V500 system's Diagnostics screens.
To access the Diagnostics screens on the system:
Go to System > Diagnostics.
To access the Diagnostics screens from the V500 web interface:
1. On a computer, open a web browser.
2. In the browser address line, enter the system's IP address (for example,
http://10.11.12.13) to go to the V500 web interface.
3. Click System Setup.
4. Enter admin as the user name, and the admin password, if a password
has been established.
5. Click Diagnostics.
Presents this information or capability:
User interface customization, system customization,
security, dialing requirements and network configuration,
key-enabled options, Global Management System
information.
System status and performance and system tests. The
V500 web interface also offers the Send Message function
and provides access to the Call Detail Report.
Identifying information.
Call scheduler and calendar.
System behavior and appearance.