Dialing Rules 1 - Polycom ViewStation FX4000 User Manual

Dialing Rules 2
© Polycom, Inc. 2002
Chapter 4 - Advanced Configuration for your Network Environment
Private Network Access—Enable this option if your
organization uses a private network for calls.
If both the caller and the called party are on your Private
Network, as indicated by enabling the Private Network Access
option, then the Address Book of the calling site (through the
Global Directory Server) will show the private numbers of the
site being called if they are entered in the Private Network
ISDN (or PRI) Number screen (System Info > Admin Setup >
LAN/H.323 > Global Address > Private Net). In other words, if
both sites have the Private Network Access enabled, then their
address books will show the other parties' private numbers
instead of the normal ISDN number.
For more information about Private Network ISDN (or PRI)
Number, refer to
page 158.
Private Network Dialing Prefix—Enter the dialing prefix
required to dial within your private network. This prefix is used
if your ViewStation FX or VS4000 and the ViewStation FX or
VS4000 you are calling have access to your organization's
private network.
If your private network requires you to dial prefixes to access certain
area codes (or city codes), you can set those prefixes in the Dialing
Rules 2 screen.
To access the Dialing Rules 2 screen:
Select System Info > Admin Setup > LAN/H.323 > Global Address
> Dialing Rules 2. The following screen appears:
Entering the Private Network Number, on
161