Multipoint Viewing Modes - Polycom ViewStation FX4000 User Manual

ViewStation FX/VS4000 User Guide

Multipoint Viewing Modes

226
Audio (POTS) add-ins are supported in mixed protocol calls.
All multipoint modes are supported in mixed protocol calls.
Chair control is supported in mixed protocol conferences.
Current Limitations
Cascading mixed protocol calls is not supported.
Once an H.323 endpoint is added to a bridge call, any open
T.120 sessions from H.320 calls will be terminated. T.120 is not
supported in mixed bridge calls.
You can select four different viewing modes for the remote sites in a
multipoint call from the Multipoint Setup screen:
Automatic Mode
Discussion Mode
Presentation Mode
Full Screen Mode
To access the Multipoint Setup screen:
On a system with IP only, select System Info > Admin Setup >
Multipoint Setup or select System Info > User Setup > Multipoint
Mode.
On a system with an ISDN network interface, select System Info >
Admin Setup > Video Network > Multipoint Setup.
www.polycom.com