Remote Control - Polycom ViewStation FX4000 User Manual

ViewStation FX/VS4000 User Guide

Remote Control

176
Topic Description
Snapshots
This section explains how to send
snapshots. It also contains information on
the Snapshot Timeout option.
Picture-In-Pict
This section describes the PIP feature (the
ure (PIP)
picture from the local camera being
displayed as a small picture on screen
during an active video call).
Graphics This section describes the graphics cursor
and how to use it.
Cursor
Most ViewStation
FX or VS4000
remote control. The remote control is an integral part of your
ViewStation FX or VS4000 system. It works very much like the
remote control that you use at home for your television.
The remote control is an "intelligent" device: it becomes active as
soon as you pick it up, and becomes inactive as soon as you set it
down again.
You will use it to highlight and select icons that appear on the
monitor connected to your ViewStation FX or VS4000, configure
your Address Book, adjust your camera, adjust the sound, place
video calls, etc.
functions are performed using the
Page
208
210
211
www.polycom.com