Modifying Isdn Video Network Information - Polycom ViewStation FX4000 User Manual

Modifying ISDN Video Network Information

© Polycom, Inc. 2002
Chapter 4 - Advanced Configuration for your Network Environment
To select dialing speeds:
Choose the appropriate dialing speeds.The default dialing
1.
speeds are 2 x 64 Kbps, 128 Kbps, 256 Kbps, 384 Kbps, 512 Kbps,
and 768 Kbps.
2. To add or remove speeds, scroll through the data rates and press
the SELECT button on the remote control to select your
preferred dialing speeds; a red check appears when a dialing
speed is selected.
This screen allows you to modify the basic ISDN (BRI) options that
were configured during the initial setup (see
Network Interface on page
Country Code—The Country Code is associated with the
country where the ViewStation FX or VS4000 is used.
Area Code—This is the area code or STD code used in the area
where the ViewStation FX or VS4000 is located.
Number A—This is the primary ISDN number assigned to the
ViewStation FX or VS4000.
Number B—This is the secondary ISDN number assigned to the
ViewStation FX or VS4000.
ISDN Switch Protocol—Select the appropriate ISDN switch
protocols. Contact the ISDN provider to determine the ISDN
switch protocol.
ISDN Number Prefix—This prefix is used to access an outside
line if the ViewStation FX or VS4000 is behind a PBX.
Setup for the Quad BRI
93). These options are:
151