Adjusting Camera Settings; Setting Camera Presets - Polycom ViewStation FX4000 User Manual

Adjusting Camera Settings

Setting Camera Presets

© Polycom, Inc. 2002
2. Highlight the icon for the second camera and press the SELECT
button on the remote control.
You can adjust the settings of your cameras from the Cameras
screen.
To access this screen:
Select System Info > Admin Setup > Video/Camera > Cameras.
The options available on the Cameras screen are described in the
section Video and Cameras Screens
You can set and store up to ten preset camera positions. These ten
camera presets can be distributed across the far camera and up to
four near-site cameras.
To set a camera preset:
1. Press the NEAR or FAR button on the remote control to select
the near or far camera.
2. If you pressed the NEAR button, press it again to select the
near-site camera.
3. Position the camera using the arrow buttons and ZOOM
buttons on the remote control.
4. Press the SELECT button on the remote control. The camera
preset circles are now displayed. A "Press 0-9 to store a preset"
message appears on the main monitor.
If the circle is transparent, the preset is empty.
If the circle is solid yellow, the preset is assigned.
Chapter 5 - Using the ViewStation FX/VS4000
in Appendix A.
Notes
203