Answering A Video Call Automatically; Rejecting A Call Automatically - Polycom ViewStation FX4000 User Manual

ViewStation FX/VS4000 User Guide

Answering a Video Call Automatically

Rejecting a Call Automatically

188
The ViewStation FX and the VS4000 are set by default to
automatically answer incoming calls. If this default has been
changed, here is how to reset it so that the system answers
automatically to any incoming call:
To set your ViewStation FX or VS4000 to answer video calls
automatically:
1. From the main screen, select System Info > Admin Setup >
General Setup or select System Info > User Setup.
2. Highlight the field next to Auto Answer Point to Point, and
select the Yes option from the drop-down menu. Yes is the
default.
3. Press the MENU button on the remote control until you return
to the main screen.
If the Auto Answer Point to Point option is set to No, all video calls
need to be answered manually. Refer to the preceding section for
more information.
To set your ViewStation FX or VS4000 to reject incoming calls
automatically:
1. From the main screen, select System Info > Admin Setup >
General Setup or select System Info > User Setup.
2. Highlight the field next to Auto Answer Point to Point, and
select the Do Not Disturb option from the drop-down menu.
3. With the Auto Answer mode set to Do Not Disturb, you will
not be notified of any incoming call. The site which placed the
call will receive either a "call rejected" or "dialed site busy"
message.
www.polycom.com