Setting Up A Gatekeeper; Figure 3-7.Gatekeeper Screen - Polycom ViewStation FX4000 User Manual

ViewStation FX/VS4000 User Guide

Setting up a Gatekeeper

80
Use the Gatekeeper screen to configure an IP (H.323) Gatekeeper.
For more detailed information on Gatekeeper, refer to
the Gateway and Gatekeeper on page
Figure 3-7. Gatekeeper Screen
A Gatekeeper is not required to make an IP-to-IP LAN call. In these
situations, select the Off option.
Use Gatekeeper. This option can be set to Off, Specify, or Auto.
• Off—If you do not want to access a Gatekeeper, select this
option.
• Specify—To specify a Gatekeeper, select this option and
enter the Gatekeeper's IP address in the Gatekeeper IP
Address field. This information is available from your
network administrator.
Auto—To have the ViewStation FX or VS4000 automatically
•
find an available Gatekeeper, select the Auto option.
Gatekeeper IP Address—This address is provided by your
network administrator.
When you have finished, review your entry for accuracy, then
highlight the Save icon and press the SELECT button on the remote
control.
118..
Note
Configuring
www.polycom.com