Chair Control; General Information - Polycom ViewStation FX4000 User Manual

ViewStation FX/VS4000 User Guide

Chair Control

General Information

234
feature is only available at the site that is providing the MCU
functionality.
To enable four-monitor support:
1. To enable this feature, select System Info > Admin Setup >
Video/Cameras > Monitors > TV Monitors.
2. In the TV Monitor screen, specify the number of monitors that
are available and connected to the ViewStation FX or the
VS4000. You can specify up to four monitors.
Refer to Appendix B,
Chair Control is a feature that allows any ViewStation FX or VS4000
in a multipoint call to do the following:
Select which sites to view
Select which site broadcasts its video to all other sites
Disconnect sites from a multipoint call
Any site in the call can access the Chair Control screen. However,
only one site can have chair control at a time. That site must release
the chair control before another site can acquire it.
Chair Control is not supported in mixed protocol conferences. For
more information, refer to
Note
Multiple Monitor Support.
Mixed Protocol Dialing on page 224.
www.polycom.com