Figure 7-1.Lan & Intranet Screen - Polycom ViewStation FX4000 User Manual
Hide thumbs
Also See for ViewStation FX4000:
- Getting started manual (50 pages) ,
- User manual (20 pages)
Table of Contents
Advertisement
© Polycom, Inc. 2002
a.
Insert one end of the provided orange RJ-45 cable into the
orange LAN port on the back of the ViewStation FX or
VS4000.
b. Insert the other end of the cable into a port on the LAN. This
connection is shown in the ViewStation FX QuickStart and
the VS4000 QuickStart.
2.
To connect the PC to the ViewStation FX or the VS4000:
a.
Insert one end of the provided blue RJ-45 cable into the blue
PC port on the back of the ViewStation FX or the VS4000.
b. Insert the other end of the cable into the Ethernet port on
your computer.
3.
Power on the ViewStation FX or the VS4000.
4.
Select System Info > Admin Setup > LAN/H.323 >
LAN/Intranet to configure the ViewStation FX or VS4000
system's LAN/H.323 settings. The LAN & Intranet screen
appears.
Figure 7-1. LAN & Intranet Screen
In the LAN & Intranet screen, configure the ViewStation FX or
5.
the VS4000 DHCP settings, as follows:
Chapter 7 - Using the System with a PC
249
Advertisement
Table of Contents
