ViewStation FX/VS4000 User Guide
Required Information
Equipment Installation
46
Before you start installing the equipment, obtain the following
information:
IP address of the ViewStation FX or VS4000: to be provided by
your Internet Service Provider or system administrator.
ISDN numbers: to be provided by your Network Service
Provider.
SPIDs: to be provided by your Network Service Provider.
Switch protocols: to be provided by your Network Service
Provider.
Gatekeeper address: to be provided by your Network Service
Provider or system administrator.
Firewall information: to be provided by your Network Service
Provider or system administrator.
Telephone numbers: to be provided by your system
administrator.
This section describes how to set up the following equipment:
ViewStation FX. See
VS4000. See
Setting up the VS4000 on page
Network interface modules (V.35/RS-449, PRI, and BRI). See
ISDN Network Interface Modules on page
Setting up the ViewStation FX on page
47.
48.
49.
www.polycom.com
Need help?
Do you have a question about the ViewStation FX4000 and is the answer not in the manual?
Questions and answers