V.35/Rs-449 Video Network Screens; Multipoint Setup; Call Preference; Video Network - Polycom ViewStation FX4000 User Manual

ViewStation FX/VS4000 User Guide

V.35/RS-449 Video Network Screens

Multipoint Setup

Call Preference

Video Network

316
same on all videoconferencing endpoints in that call so that the
call never times out.
From the main Video Network icon, you can access screens that are
specific to the V.35/RS-449 network interface, as listed below.
To access the main Video Network screen:
Select System Info > Admin Setup > Video Network.
See Multipoint Viewing Modes, on page
See Setting your Call Preference on page
When you enable the LAN/Internet Calls (H.323) option in the Call
Preference screen, your system resets itself automatically and takes
you through the initial configuration screens (see
(H.323) Calls). Existing system information is not erased during this
process.
See Setting Video Network Options on page
Network screen, you can also access the Dialing Speeds, Broadcast
Mode, and Advanced Dialing configuration screens.
226.
76.
Note
Initial Setup for IP
82. From the Video
www.polycom.com