Figure 4-4.H.323 Setup Screen (Configuration) - Polycom ViewStation FX4000 User Manual

ViewStation FX/VS4000 User Guide
116
To access the H.323 Setup configuration screen:
Select System Info > Admin Setup > LAN/H.323 > H.323 > Setup.
The H.323 Setup screen appears.
Figure 4-4. H.323 Setup Screen (configuration)
Following is a description of the options displayed on the screen:
H.323 Name when calling this system—Your system name
appears as your H.323 name, but you can change it on this
screen.
H.323 Extension (E.164)—This is the number that is needed to
access a specific LAN device for incoming calls. You can change
the extension to a number that is easy to remember. Your
administrator might have specific names and extensions. If you
have a Gatekeeper installed on your network, other parties can
call you by using the H.323 name or extension. The H.323 name
and extension are registered with your Gatekeeper.
Auto H.323 Dialing—When this option is enabled, the
ViewStation FX or VS4000 is able to automatically detect the
type of call you are placing (IP or ISDN) based on the video
number format. Consequently, the ISDN (or V.35) and IP fields
are not visible on the Video Phone screen. This option is
enabled by default.
Display IP Dialing Extension—This extension is needed when
placing a call through a Gateway. When this option is selected,
the Extension field is visible in the Video Phone screen.
www.polycom.com