Enabling Automatic Voice Tracking (Viewstation Fx Only) - Polycom ViewStation FX4000 User Manual

ViewStation FX/VS4000 User Guide

Enabling Automatic Voice Tracking (ViewStation FX Only)

204
To clear all the presets, press the pound (#) key on the remote.
5. Press a number button on the remote control to assign that
button to the preset.
6. To select a camera preset, press the NEAR or FAR button for the
desired camera and press the number button on the remote
control for the preset you want.
The main camera on your ViewStation FX can automatically move
to whomever is speaking in the meeting. The first time the camera
moves to a person, it might take several seconds of continuous
speech to locate the person speaking.
The camera picks out the position quickly the next time the person
speaks. Automatic voice tracking mode uses the built-in
hypercardiod microphones in the set-top unit (instead of using the
microphone pods) to triangulate the location of the current speaker
and aim the camera at that person. If the person moves or another
person speaks, the camera will retriangulate and re-aim the camera.
www.polycom.com