Setting The Global Address Book Preferences; Figure 4-27.Global Address (Server) Screen - Polycom ViewStation FX4000 User Manual

ViewStation FX/VS4000 User Guide

Setting the Global Address Book Preferences

154
Figure 4-27. Global Address (Server) Screen
You can configure the following GAB server options on this screen:
Server IP Address—Enter the IP address of the GAB server.
Server Password—Enter the GAB server password, if there is
one.
Global Directory Server Version—This displays the current
version of the Global Directory.
Display Global Addresses—When you enable this option,
global addresses appear in the ViewStation FX or VS4000
Address Book.
Register this System When Powered On—When you enable
this option, the ViewStation FX or VS4000's IP address appears
in the GAB when the system is powered on. If you do not enable
this option, the ViewStation FX or VS4000 has access to the GAB,
but does not appear in the Global Address Books of other
ViewStation FX or VS4000 systems.
The GAB display and dialing options available on this screen are
determined by the call type options and the Use Gatekeeper option
that you have previously enabled on the Call Preference and
Gateway & Gatekeeper screens respectively.
www.polycom.com