ViewStation FX/VS4000 User Guide
Selecting Dialing Speeds
128
2.
Select the Broadcast Mode Setup icon to access the Broadcast
Mode configuration screen.
Figure 4-10. Video Network Screen and Broadcast Mode Screens
On the Broadcast Mode screen, you can set the following video
and audio preferences:
Video Format—Select QCIF to transmit Quarter Common
Interchange Format (176 x 144 resolution). Select FCIF to
transmit FCIF (Full CIF 352 x 288 resolution)
Video Protocol—Select H.261 to transmit video using the H.261
video standard. Select H.263 to transmit video using the H.263
enhanced video algorithm. Far-end systems that support H.263
receive H.263.
Audio Mode—Select the preferred audio protocol to transmit
audio: G.728, G.711u, G.711A, G.722-56, G.722-48, or Off.
Frame Rate—Select the preferred video frame rate for the
broadcast transmission: 30 fps, 15 fps, 10 fps, or 7.5 fps.
This screen lets you limit the choices that appear as speed selections.
Offering a minimum number of speeds is a way to lower network
traffic. The speeds that are selected in this screen will be displayed
as dialing speed selections in the Video Phone and in the Address
Book screens.
www.polycom.com