Setting The Administrator Password; Figure 3-22.Administrator Password Screen - Polycom ViewStation FX4000 User Manual

Setting the Administrator Password

© Polycom, Inc. 2002
To disable cameras, set your camera inputs as S-video or composite
(VS4000 only), and enable pan/tilt/zoom capability on a camera.
The initial system configuration is complete. You are returned to the
main screen.
The Administrator Password screen contains an initial
administrator password, which is your system's serial number.
The administrator password allows access to all the Admin Setup
screens using the user interface or the Web interface.
You can change, remove, or keep the initial password.
Figure 3-22. Administrator Password Screen
To change the administrator password:
1. Highlight the password field using the remote control.
2. Backspace over the initial password (the system's serial
number) using the left arrow key on the remote control.
When the field is empty, start entering your new password as
3.
follows:
Enter numbers using the remote control's keypad.
Enter letters and characters as directed below:
Chapter 3 - Initial System Setup
97