Example Display Of Warnings From Sip Headers Configuration; Quick Setup Of The Cx5500 System - Polycom CX5500 Administrator's Manual

Polycom CX5500 Unified Conference Station Administrator's Guide
You can display these pop-up messages in any language supported by the phone. The messages will
display for three seconds unless overridden by another message or action. To turn the warning display on
or off or specify which warnings are displayable, you can configure the parameters in
Header Warnings.
Displaying SIP Header Warnings
Central Provisioning Server
Turn this feature on or off
Specify which warnings are displayable
Example Display of Warnings from SIP Headers
Configuration
To enable the display of warnings from SIP headers, set the
voIpProt.SIP.header.warning.enable parameter in the features.cfg template to 1. Enter the
warning codes as a comma-separated string. The strings associated with the values 325 to 329 that
display on the phone screen, as shown in the next illustration, have been entered automatically by the call
server and are not entered by the administrator in the configuration file.
The following illustration shows a sample configuration from the sip-interop.cfg template file:

Quick Setup of the CX5500 System

A Quick Setup feature was added to simplify the process of entering the provisioning (boot) server
parameters from the phone's user interface. This feature is designed to make it easier for on-site out of
the box provisioning of the CX5500 system.
When you enable this feature, a QSetup soft key will display on the phone. When you press the QSetup
soft key, a new menu will display. The menu enables you to access the provisioning server and quickly
configure the phone to work. After configuring the Quick Setup, you can disable display of the QSetup
Polycom, Inc.
template > parameter
sip-interop.cfg > voIpProt.SIP.header.warning.enable
sip-interop.cfg > voIpProt.SIP.header.warning.codes.accept
1.1.0
Displaying SIP
153