Entering The Private Network Number; Establishing Dialing Rules - Polycom ViewStation FX4000 User Manual

ViewStation FX/VS4000 User Guide

Entering the Private Network Number

Establishing Dialing Rules

Dialing Rules 1
158
The Private Network ISDN (or PRI) Number provides a second
number that can be used to call the ViewStation FX or VS4000
system (for example, the company's PBX has two different lines
coming from different network providers). It provides the correct
numbers to the caller for the additional lines needed after the
connection of the first line.
The Private Network Number can also be used to tell the PBX that
additional calls should be routed internally within the PBX instead
of going outside the PBX through the trunk line. In other words, the
Private Network Number can be used as a "fake" number which the
PBX handles as an internal number.
To access the Private Network ISDN (or PRI) Number screen:
Select System Info > Admin Setup > LAN/H.323 > Global Address
> Private Net.
This screen is only accessible if a BRI or PRI network interface is
attached to the system. The private number is generally obtained
from the IT manager or the network administrator.
Some PBXs always signal the same called number independent of
which number was used to call an endpoint. The private number
method might fail in this situation.
ViewStation FX or VS4000 numbers are automatically normalized
for the address books of other ViewStation FX or VS4000 systems:
Global Dial takes into account the numbers, area codes (or city
codes), country codes, and international dialing access codes for
Note
www.polycom.com