Security; Figure A-14.Security Screen - Polycom ViewStation FX4000 User Manual
Hide thumbs
Also See for ViewStation FX4000:
- Getting started manual (50 pages) ,
- User manual (20 pages)
Table of Contents
Advertisement
Security
© Polycom, Inc. 2002
The Security screen lets you set the passwords used to access
your ViewStation FX or VS4000 system remotely. You are not
required to set passwords on your ViewStation FX or VS4000.
To access the Security screen:
Select System Info > Admin Setup > Security
.
Figure A-14. Security Screen
Admin Password—This password is used to protect nearly all
setup screens in the user interface. When using the system Web
interface, you are required to enter the admin password, if one
has already been set in the Security screen.
Meeting Password—This password is used:
•
As the password for the ViewStation FX or VS4000 when it
it is used as an MCU in a multipoint conference.
•
For dialing into an MCU with a password already set.
•
As the password for viewing slides on the Web interface.
•
As the password for viewing streams on the Web interface.
For accessing Closed Caption on the Web interface.
•
If no password is set, the user is not prompted for or does not
need to enter the Meeting Password.
Appendix A - Screen Reference
337
Advertisement
Table of Contents
