Figure 4-23.Auto Detect Spids Screen - Polycom ViewStation FX4000 User Manual

Chapter 4 - Advanced Configuration for your Network Environment
To access the Auto Detect SPIDs screen:
Select System Info > Admin Setup > Video Network > IMUX >
SPIDS. The Auto Detect SPIDs screen appears.
Figure 4-23. Auto Detect SPIDs Screen
Note
This screen appears only if you selected United States or Canada as
your country on the country screen.
Entering the SPIDs manually. The SPIDs obtained from your
network service provider can be entered manually on the Auto
Detect SPIDs screen. If you are behind an internal phone system
(PBX), you may not need to enter SPIDs.
Automatically detecting the SPIDs. If you do not have any SPID
numbers, highlight the Start icon to have your system try to detect
them automatically. This initiates a process that automatically
detects the SPID numbers associated with your ISDN line. This
process can take as long as ten minutes, but will usually require
three minutes or less. If you are behind a PBX, select the PBX icon.
Your system will try to locate the SPID numbers within the PBX.
If your system is unable to find your SPIDs, make sure that you are
properly connected and that you have entered your ISDN numbers
correctly.
© Polycom, Inc. 2002 147