What You Need To Install The Viewstation Fx Or Vs4000 System; Television Monitors; Network Interfaces; Ethernet - Polycom ViewStation FX4000 User Manual

ViewStation FX/VS4000 User Guide
What you Need to Install the ViewStation FX or
VS4000 System

Television Monitors

Network Interfaces

Ethernet

ISDN

42
This section lists the additional items you need to install the
ViewStation FX or VS4000 system. It also provides a checklist of
information you should have on hand during the installation
process.
For details of the ViewStation FX or VS4000 system components, see
the QuickStart card provided with each system.
You can use the ViewStation FX or VS4000 with four television
monitors and a VGA monitor that operates at 75 Hz or higher with
a resolution of 800 x 600, 1024 x 768, or 1280 x 1024.
The ViewStation FX can use any S-video or composite television
monitor as the primary monitor. The other three monitors have to be
S-video. With the VS4000, all four monitors can be composite.
The size of the monitor should be proportional to the size of the
room where video conferences take place.
A Local Area Network (LAN) Ethernet connection is needed if you
plan to use IP.
If you are using one of the following ISDN network interfaces with
your ViewStation FX or VS4000, you will need the appropriate
www.polycom.com