Initial Setup For Isdn (H.320) Calls; Setup For The V.35/Rs-449 Network Interface - Polycom ViewStation FX4000 User Manual

Initial Setup for ISDN (H.320) Calls

Setup for the V.35/RS-449 Network Interface

© Polycom, Inc. 2002
If you have an ISDN connection, you will need to configure the
appropriate interface (V.35/RS-449, PRI, or BRI). Refer to the
appropriate ISDN network interface section:
V.35/RS-449. See
on page 81.
PRI. See Setup for the PRI Network Interface on page
BRI. See Setup for the Quad BRI Network Interface on page
If you have a V.35/RS-449 network interface module, the following
screens are designed to help you with your V.35/RS-449 network
configuration:
Video Network. See
page 82.
Dialing Speeds. See
Broadcast Mode. See
page 83.
Advanced Dialing. See
on page 84.
Video Numbers. See
page 86.
Setup for the V.35/RS-449 Network Interface
Setting Video Network Options on
Selecting Dialing Speeds on page
Setting Broadcast Mode Options on
Setting Advanced Dialing Preferences
Entering V.35/RS-449 Video Numbers on
Chapter 3 - Initial System Setup
87.
83.
91.
81