Figure 7-5.Pcpresent Screen - Polycom ViewStation FX4000 User Manual

© Polycom, Inc. 2002
Figure 7-5. pcPresent Screen
5. In the pcPresent screen, configure the following options:
a. Enter your name (your host name is here by default).
b. Enter a password...: Enter a presentation password, if you
wish to establish one for the presentation. You will be
prompted later for this password when you select the
presentation.
c. Use NAT Address: Enable or disable the Use NAT Address
option as is appropriate as described below. Use NAT
Address is enabled by default. The Use NAT Address field
only appears if the ViewStation FX or VS4000 detects a NAT
device.
– If your PC or laptop is behind a NAT device but the
ViewStation FX or VS4000 system is not, make sure that
Use NAT Address is enabled. In addition, you will have
to open the following ports in the NAT device so that
the slides can successfully load into the ViewStation FX
or VS4000:
80 (http port)
21 (ftp control port)
5004 and 65000 ports
– If your PC or laptop and the ViewStation FX or VS4000
are both behind the same NAT device, disable the
option Use NAT Address.
Chapter 7 - Using the System with a PC
263