Selecting The Call Type Order For Onedial Address Book Entries - Polycom ViewStation FX4000 User Manual

Selecting the Call Type Order for OneDial Address Book
Entries
© Polycom, Inc. 2002
Chapter 4 - Advanced Configuration for your Network Environment
If Number + Extension is the Gateway Number Type that you
selected on the Gateway Number screen, then the possible
Preferred Alias options are:
• ISDN Number (if the system has ISDN natively)
• H.323 Extension
The Advanced Address Book Preferences screen lets you select the
order of the call types (IP or ISDN) to use when you dial OneDial
Address Book entries which contain both IP and ISDN numbers. For
more information about OneDial, refer to
and Gatekeeper, on page
To access the Advanced Address Book Preferences screen:
Select System Info > Admin Setup > LAN/H.323 > Global Address
> Preferences> Advanced Preferences.
Two choices are available:
Primary Call Type Choice—This option sets which call type the
ViewStation FX or VS4000 system will try first when dialing a
site (which can be reached via IP and ISDN) from the Address
Book. The choice can be ISDN or IP.
It is automatically reset to Manual if the setting matches that of
the Secondary Call Type Choice. If both ISDN and
LAN/Intranet are enabled, ISDN is the default.
If a call cannot be established using the primary call type, the
system will use the secondary call type to automatically attempt
to reconnect.
Secondary Call Type Choice—This option sets which call type
the ViewStation FX or VS4000 system will try second when
dialing a site (which can be reached via IP and ISDN) from the
Address Book. The choice can be ISDN, IP, or None. It is
automatically reset to None if the setting matches that of the
Primary Call Type Choice. If both ISDN and LAN/Intranet are
enabled, IP is the default.
Configuring the Gateway
118.
157