Initial Setup For Ip (H.323) Calls; Setup For Ip (H.323) Calls; Figure 3-6.H.323 Setup Screen - Polycom ViewStation FX4000 User Manual

ViewStation FX/VS4000 User Guide

Initial Setup for IP (H.323) Calls

Setup for IP (H.323) Calls

78
The initial IP configuration screens include the following:
H.323 Setup. See
Gatekeeper. See
The H.323 Setup screen appears if you have previously checked the
LAN/Internet Calls (H.323) option on the previous screen (Call
Preference).
The H.323 option allows you to place video calls using IP on your
local area network (LAN) or wide area network (WAN). The H.323
Setup screen allows you to configure the H.323 name and extension
that can be used to dial your ViewStation FX or VS4000.
Figure 3-6. H.323 Setup Screen
H.323 Name when calling this system—Your system name
(previously configured in the System Name screen) is used to
initialized your H.323 name. However, you can change it on this
screen. There are no format restrictions for the H.323 name.
H.323 Extension (E.164)—You can also change the extension to
a number that is easy to remember. Your administrator might
have specific names and extensions. If you have a Gatekeeper
installed on your network, other parties can call you by using
Setup for IP (H.323) Calls on page
Setting up a Gatekeeper on page
78.
80.
www.polycom.com