Polycom ViewStation FX4000 User Manual page 170

ViewStation FX/VS4000 User Guide
172
You can enter the following information on the SNMP Setup screen:
Enable SNMP—Enable or disable SNMP in this field.
Administrator Contact Name—Enter the name of the person
responsible for remote management of this system. The default
setting for this field is "IT Administrator."
SNMP Console IP Address—Enter the IP address of the SNMP
traps sent by the ViewStation FX or VS4000. Enter 0.0.0.0 in this
field if any SNMP management console is capable of receiving
information from this agent.
Location Name—Enter the location of the ViewStation FX or
VS4000. This field defaults to your ViewStation FX or VS4000
system name@your country name.
Community Name—Enter the SNMP management community
in which you want to enable this agent. The default setting for
this field is "Public."
System Description—This field displays the type of
videoconferencing device. You cannot edit this field.
www.polycom.com