Cameras (Fx); Figure A-10.Cameras Screen - Polycom ViewStation FX4000 User Manual

ViewStation FX/VS4000 User Guide

Cameras (FX)

332
To access the Cameras screen:
Select System Info > Admin Setup > Video/Camera > Cameras.
Figure A-10. Cameras Screen
The following options are available:
Far Control of Near Camera—When you enable this option, the
far site, while in a call can control your camera.
Backlight Compensation—Enable this option if your
background is too bright.
Snapshot Camera—This option lets you select the default
camera from which you want to send snapshots.
Camera Direction—This option lets you set the camera to move
in the same direction as the arrows on the remote control or in
opposite directions.
Primary Camera—This option lets you select the camera that is
used when you power on the ViewStation FX or the VS4000
system. You cannot disconnect the main camera, but you do not
have to set it as the primary camera.
www.polycom.com